Haier HLC24XLPW2a User Manual - Page 22
Preset, Time Shift], USB Drive Storage Format, Start Time Shift Recording, Time Shift limitations
View all Haier HLC24XLPW2a manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Preset: Resetting MP3 relative parameters to the default values. Exit: Exit MP3MusicBox interface. [Time Shift] - The feature allows the viewer to pause and record the currently watched digital program (ATSC or QAM) and resume to the point where it was paused. Plug the USB storage device to activate the Time Shift selection in Feature menu. Note: - Formatting a USB 2.0 storage device will be needed. Save your original data before formatting. All the data stored in the USB device will be erased after formatting. - Sleep timer will be suspended if it had been set before Time Shift. • USB Drive Storage Format: Select to format the USB disk and locate a fix area for Time Shift function. Note: • Format process will take at least 2 minutes. Please do not turn off power or remove USB disk during formatting. • During formatting, a speed test will be done on the USB disk. If it fails, it means the USB disk may not support the Time Shift functions. • Start Time Shift Recording: Select to start the Time Shift function. Note: • Please do not unplug the USB storage device when the Time 22 Shift function is activated. • Approximately 4GB memory buffers could offer 180 minutes for 480i contents or 30 minutes for 1080i contents. • Once 4GB of data gets stored, the time shift function will delete the stored data and restart the buffering of content.This occurs even for USB devices larger than 4GB. Note: Time Shift limitations: 1. When the Time Shift feature is activated, only the PLAY/ PAUSE/STOP/FWD/REV/ VOL+/VOL-/MUTE keys and some basic operation keys (ENTER/EXIT/navigation keys) are available.When a key is pressed and that function is unavailable, the dialog box shown below will appear. This Key Is Unavailable During Time Shift Operation ! OK 2. Video playback may not be smooth and skip if USB recording speed does not meet the minimum requirements (for certain 1080i/p signals). 3. Do Not remove USB disk or switch off the power during Time Shift operations. It will abort once the signal is lost. 4. Do Not remove the signal source during Time Shift operations. 5. Do Not quickly and