Haier HLC24XLPW2a User Manual - Page 11

English Please make sure to connect the power plug to the wall outlet socket after connecting the TV to the power cord! 1. Install the base stand; place the TV on a solid surface. 3. Remote control: Remove the cover of the battery compartment. Insert the 2 batteries supplied (Type AAA 1.5V). HTR-D10 HTR-D10 Min 1 m Ensure that the TV is placed in a position to allow free flow of air. Do not cover the ventilation openings on the back cover. To prevent any unsafe situations, no naked flame sources, such as lighted candles, should be placed on or in the vicinity. Avoid heat, direct sunlight and exposure to rain or water.The equipment shall not be exposed to dripping or splashing. 2. Connect the antenna cable or CATV cable to the aerial socket ANT IN 75Ω at the back of the TV set. 4. Power: Connect the DC end of the power adaptor to the TV first, and then connect the AC end. Make sure the connection is tight. Finally inset the AC plug in the wall socket. 5. Turn the TV on: Press the Power key on the remote control or the side panel control button. Power Key 11