Haier HLPW028AXW Installation and User Manual - Page 14

Electrical Shock Hazard

Get Haier HLPW028AXW PDF manuals and user guides View all Haier HLPW028AXW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

WARNING Electrical Shock Hazard Disconnect power before servicing. Replace all parts and panels before operating. Failure to do so can result in death or electrical shock. 1. Lay folded blankets or towels on the floor to create an incline. 2. Using two or more people, lay the washer onto its side so that the top of the washer is higher than the base, and the drain outlet is facing upward. a b a Drain Outlet b Top of Washer 3. With the side of the bottom cover that is marked FRONT/UP toward the interior and front of the washer, align the edges of the cover with the track in the bottom of the washer. 4. From the front of the washer, slide the bottom cover fully into the track making sure the edges of the cover are behind the tabs. NOTE: When the cover is completely inserted into the track behind the tabs, the hole for the screw will be flush and aligned with the hole in the cabinet bottom. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
12
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1.
Lay folded blankets or towels on the floor to create an incline.
2.
Using two or more people, lay the washer onto its side so that the top of the
washer is higher than the base, and the drain outlet is facing upward.
a
b
a
Drain Outlet
b
Top of Washer
3.
With the side of the bottom cover that is marked FRONT/UP toward the interior
and front of the washer, align the edges of the cover with the track in the bottom
of the washer.
4.
From the front of the washer, slide the bottom cover fully into the track making
sure the edges of the cover are behind the tabs.
NOTE:
When the cover is completely inserted into the track behind the tabs, the
hole for the screw will be flush and aligned with the hole in the cabinet bottom.