Haier HLPW028AXW Installation and User Manual - Page 16
Step 4 - Connect The Water Hoses - model
View all Haier HLPW028AXW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
STEP 4 - CONNECT THE WATER HOSES Depending on your model, the water hoses provided will be either Style 1 or Style 2. Follow the instructions specific to the style of water hoses provided. IMPORTANT: Only use new hoses when installing the washer. The water hoses must have a coarse thread connectors on one end (to connect to the household water supply), and fine thread connectors on the other end (to connect to the washing machine). NOTE: Periodically inspect hoses for cracks, cuts, leaks or wear. Replace with new hoses every 5 years. 1. Check that a flat washer is present and firmly in place in each end of the water inlet hoses. Flat washers are pre-installed at the factory. Style 1 Style 2 A a a Washer 2. Thread the inlet hoses onto the water faucets by hand until firmly hand tightened. IMPORTANT: To avoid damage to the hose couplings, do not overtighten. NOTE: To avoid damage to the faucets do not use plumber's tape or sealants on the valve threads. a Gray End Only a 3. Thread the white end of the inlet hoses by hand onto the inlet valves marked "H" (hot) and "C" (cold) on the back of the washer until snug. IMPORTANT: • Do not connect the gray end of the inlet hose to the washer. You will damage the threads and it will leak. • To avoid damage to the hose couplings, do not over tighten. 14