Haier HLT10 Instruction Manual - Page 11

2. AUDIO SETUP Press left or right button to enter audio setup page: INSTALL BATTERY Sound mode -press up or down button to select it and then press left or right button to set the sound mode as Personal, Standard, Music or Movie. Bass/Treble/Balance -press up or down button to select Bass/Treble/Balance and then press left or right button to adjust. -The Bass/Treble/Balance can be adjusted from 0-100. Audio Language Audio Channel -To switch the Audio channel: L+L/ L+R/ R+R 3. TIME SETIUP Press left or right button to enter time setup page: 16 INSTALL THE BATTERY AS FOLLOWS: 1. Unscrew the screw to remove battery cover. 2.Put the lithium battery in the flute. 3.Close the cover, then tighten the screw. Note: -Before install the battery, please push the POWER ON/OFF switch to OFF. -Twist off or tighten the screw only on the sense showed by the direction on the unit. -When closing the cover, you should aim at the slot accuracy. Rechargeable Battery Use 1.Charge the battery -Slow charge: The battery will charge in the play mode at a slow pace takes up to 12 hrs to charge completely. -Rapid charge: Connect the AC adapter to unit and trun the power switch off, the battery will charge at rapid pace in 3 hrs. - The indicator is red during charging; it gets green when charging completed. 2.Using and Maintaining Rechargeable Battery -.The normal working condition temperature is: 0 ~45 ; -.Always unplug AC/DC power supply for the unit whenever not playing. NOTE: A new battery pack which has not been used or one which has not been used for more than a month, may appear to not recharged enough , this is due to the characteristic of this battery and is not a malfunction. In this case, recharge it two or three times before the first use，and it needs more than 8 hours to recharge battery. Noises may be generated during recharging. In this case, use a more distant power socket. Do not recharge or discharge battery near a heating element such as a heater or direct sunlight. 9