Haier HLTD600AEW User Manual - Page 14

Gas Supply Connection Requirements

Get Haier HLTD600AEW PDF manuals and user guides View all Haier HLTD600AEW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

GAS SUPPLY REQUIREMENTS NOTE: The gas service to the dryer must conform with local codes and ordinances and the latest edition of the National Fuel Gas Code, ANSI Z223.1 or in Canada, CAN/CGA B149.1. Natural Gas • The dryer is equipped for use with Natural gas. LP (Liquid Propane) Gas • The dryer can be converted for use with LP gas. • Conversion to LP gas must be made by a qualified technician. Gas Supply Line • The gas supply line should be ½" (1.3 cm) pipe and must have an individual manual shutoff valve installed within 6 ft (183 cm) of the dryer in accordance with the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or in Canada with the Natural Gas and Propane Installation Code, B149.1. • The shutoff valve should be easy to reach for opening and closing. • A ⅛" NPT minimum plugged tapping, accessible for test gage connection, must be installed immediately upstream of the gas supply connection to the dryer. • The supply line should terminate with a ⅜" NPT flare adapter fitting. a ½" NPT Gas Supply Line b Gas Shutoff Valve c ⅛" NPT Minimum Plugged Tapping d ⅜" NPT Flare Adapter Fitting B C A D GAS SUPPLY CONNECTION REQUIREMENTS This dryer must be connected to the gas supply line with a listed flexible gas connector that complies with the standard for connectors for gas appliances, ANSI Z21.24 or CSA 6.10. Flexible stainless steel gas connector: • If local codes permit, use a new flexible stainless steel gas connector (Design Certified by the American Gas Association or CSA International) to connect your dryer to the rigid gas supply line. Use an elbow and a ⅜" flare x ⅜" NPT adapter fitting between the stainless steel gas connector and the dryer gas pipe, as needed to prevent kinking. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
12
GAS SUPPLY REQUIREMENTS
NOTE:
The gas service to the dryer must conform with local codes and ordinances
and the latest edition of the National Fuel Gas Code, ANSI Z223.1 or in Canada,
CAN/CGA B149.1.
Natural Gas
•
The dryer is equipped for use with Natural gas.
LP (Liquid Propane) Gas
•
The dryer can be converted for use with LP gas.
•
Conversion to LP gas must be made by a qualified technician.
Gas Supply Line
•
The gas supply line should be ½" (1.3 cm) pipe and must have an individual
manual shutoff valve installed within 6 ft (183 cm) of the dryer in accordance with
the National Fuel Gas Code, ANSI Z223.1/NFPA 54, or in Canada with the Natural
Gas and Propane Installation Code, B149.1.
•
The shutoff valve should be easy to reach for opening and closing.
•
A ⅛" NPT minimum plugged tapping, accessible for test gage connection, must
be installed immediately upstream of the gas supply connection to the dryer.
•
The supply line should terminate with a ⅜" NPT flare adapter fitting.
a
½" NPT Gas Supply Line
b
Gas Shutoff Valve
c
⅛" NPT Minimum Plugged Tapping
d
⅜" NPT Flare Adapter Fitting
B
C
D
A
GAS SUPPLY CONNECTION REQUIREMENTS
This dryer must be connected to the gas supply line with a listed flexible gas
connector that complies with the standard for connectors for gas appliances, ANSI
Z21.24 or CSA 6.10.
Flexible stainless steel gas connector:
•
If local codes permit, use a new flexible stainless steel gas connector (Design
Certified by the American Gas Association or CSA International) to connect your
dryer to the rigid gas supply line. Use an elbow and a ⅜" flare x ⅜" NPT adapter
fitting between the stainless steel gas connector and the dryer gas pipe, as
needed to prevent kinking.