Haier HLTD600AEW User Manual - Page 26

CYCLE STATUS LIGHTS The relative light will be lit when the dryer is in its drying program, say the cooling LED will lit when the dryer is operating in cooling down process. When the whole program is finished, the Clean Filter light will flash to remind you to clean the filter. ENERGY SAVER Press once to select this function so that you can save money with similar drying performance.. DELAY BUTTON Delay the start of any cycle for up to 24 hours in one-hour increments. Displayed hours indicates the time the dry will start operation. DRYNESS LEVEL BUTTON Press the button to select the dryness level. Different dryness level will result in different drying time. For clothes to be ironed manually, a lower dryness level should be selected. CHILD LOCK Press the Dryness and Temp buttons together to activate the Child lock function. Press again for another 3 seconds to deactivate the function. All selection except the "Power" will be out of function. TEMP BUTTON Press the button to select the drying temperature. High - For sturdy cottons or those labeled Tumble Dry. Medium - For permanent press, synthetics, lightweight cottons, or items labeled Tumble Dry Medium. Low - For lower heat than Medium to dry synthetic or washable knit fabrics. Ultra Low - For heat sensitive items labeled Tumble Dry Low or Tumble Dry Warm. No Heat - Provides just the air cycle without any heat. BUZZER BUTTON Press once to stop the buzzer sound. Press again to activate the sound. Your selection will be kept until next pressing. 24