Haier HWD1000 Instruction Manual - Page 20

English Warning Code Warning code E11 E12 E13 E31 EA3 EC4 EC5 U01 U02 U03 U04 E22 Item of concern Water supply Drainage Drainage Water supply Motor Water level is abnormal in the drying process The temperature of air vent The dry temperature sensor Door is locked Door is not locked Spin lopsidely The door is opened The memory function has failed Content of identification The water level can not reach the reset water level within 5 minutes The water level can not reach the setting water level within 8 mintues The water level can not reach the reset level in 8 minutes after drainage starting The water is above the warning level The feedback signal does not change in 8 minutes during the motor runs The water setting level during the drying process Within 30 minutes of dry cycle there is 5 minutes in which the temperature is not increasing The drying sensor circuit short or open Can not unlock Can not lock the door The judgement of un-balance is above 1000g The door is opened EEPROM is not functioning Action to take Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Warning and stop running Spin at low speed and cancel drying Warning Warning Checking position and ask for help Check if the water pressure or water supply is low Check if the water pressure is low or stops supplying Check the water outlet of the drainage, adjust it and restart the machine Ask the technician to repair it Ask the technician to repair it Check the water outlet of the drainage required and adjust it if required and restart the machine Ask the technician to repair it Ask the technician to repair it Ask the technician to repair it Ask the technician to repair it Ask the technician to repair it Close the door Ask the technician to repair it 19