Haier HWD120-B1558 User Manual - Page 30

8- Care and cleaning GB 8.4-1 8.4-2 8.4 Long periods of disuse If the appliance is left idle for a longer period: 1.
Pull out the electrical plug (Fig. 8.4-1). 2.
8 3.
Open the doors to prevent formation of moisture and odours. Leave doors open while not in use. Before next usage carefully check the power cord, water inlet and drain hose. Make sure everything is properly installed and does not leak. Note: Tub Clean After long periods of disuse we recommend to run the "Tub Clean" programme without a load and a small amount of detergent or a special machine cleaner to remove possibly corruptive residues.
8.5-1 8 A 8 - the appliance:
doesn´t drain the water.
doesn´t spin.
makes unusual noises while running. 8.5-2 8.5-3 1.
Start spinning programme and drain out the water. 2.
and unplug the appliance (Fig. 8.5-2). 3.
Open service fl screwdriver (Fig. 8.5-3). 8.5-4 30 4.
Provide a flat container (1) to catch leach water (Fig. 8.5-4). There could be bigger amounts! 5.
Pull the drainhose (2) out and hold its end above the container. 6.
Take the sealing plug (3) out of the drainhose. WARNING! hot! Before any action please ensure water has cooled down.