Haier HWD120-B1558 User Manual - Page 39

GB 10- Installation CAUTION!
The drain hose should not be submerged in water and should be securely xed and leak-free. If the drain hose is placed on the ground or if the pipe is at a height of less than 80 cm, the appliance will continuously drain while being lled (self-siphoning).
Drain hose is not to be extended. If necessary contact Aftersales service. 10.5 Fresh water connection Make sure that the gaskets are inserted. 1.
Connect the water inlet hose with the angled end to the appliance (Fig. 10.5-1). Tighten the screw joint by hand. 2.
The other end connect to a water tap(Fig. 10.5-2). 10.5-2 10.5-1 10.6 Electrical Connection 10.6 Before each connection check if:
power supply, socket and fusing are appropriate to the rating plate.
the power socket is earthed and no multi-plug or extension.
the power plug and socket strictly match. WARNING!
dry and leack free!
Take care these parts are never to be crushed, kinked, or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see warranty card) in order to avoid a hazard. Note: Tub Clean nance run programme "Tub Clean" with no load and small amount of detergent or with special machine cleaner to remove possibly corruptive residues. 39