Haier HWM120-1678ES5 User Manual - Page 17

Cleaning and Maintenance Maintenance Remove the power plug before carrying out any cleaning and maintenance. Clean the lint filter(s) and detergent drawer after each wash,otherwise it may influence your next use. Clean the detergent drawer and install The lint filter must be used during washing. back to the original position. Clean the lint filter after use. How to 1.Slightly lift up the drawer and push remove and install the lint filter: it out. 2.Rinse the drawer with water and brush 1.Press down the upper area of the filter it until it is clean. case to remove. (figure 1) 3.Insert the drawer back to the appliance. 2.Unlock the front cover. (figure 2) 3.Clean the filter with running water and a brush. 4.When cleaning is completed, put the filter back to the filter case. 5.Close the cover and reinsert the filter case back to the original position. 6.Make sure the filter case fits in completely, Remove otherwise it will affect the washing performance. To prevent blockage of water supply by dirt and dust, clean the filter at water inlet valve by brushing it every 2 months. The front cover of the lint filter The back cover of the lint filter Up Dismantle Up Install Install Dismantle Down Down Figure 1 Figure 2 If the washing machine case is dirty, wipe it with a damp cloth. Do not wash directly with water. Use a soft cloth with soap liquid to clean the washing machine case. Do not wipe machine with thinners, petrol, alcohol or other hash solvents. 1.After washing cycle finished, turn off the water faucet.(If needed, you can remove the water inlet hose). 2.Do not store water inside the tub for a long period of time without complete a wash cycle. Drain out the water completely after wash. 3.Hang the power cord and drain hose properly. 4.Use a soft cloth to wipe out water droplets on the washing machine case. Leave the lid opens for an hour to prevent formation of moisture and odours. 15