Haier HWM120-1678ES5 User Manual - Page 8
Position the drain hose, Inlet pipe connection
View all Haier HWM120-1678ES5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation & Adjustment Position the drain hose 1.Do not let the drain hose run over doorsills that protrude 10cm from the floor. 2.Do not trample on the drain hose. 4.If extra drain hose is needed, please make separate purchase.The inner diameter of the extra hose shall not less than 30mm,and the length shall not exceed 1.5m. ≤1.5m 3.Cut the excessive part if needed. 5.If the extra hose is too long, cut it either at A or at B point. AB Note: The new water inlet hose supplied with the appliance is to be used and the old water inlet hose should not be reused. Inlet pipe connection The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. Connect the water faucet water faucet,suitable The exit end face of the faucet water faucet, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not please file it to avoid leakage. 6