Haier HWM60-M1201 User Manual - Page 3

Operation & wash cycles 1.Push the button to switch on the power Power 2.Push the Cycle button to select suitable automatic program Cycle After the power is switched on,"Normal" is automatically set. To select other fully-auto program,please push the "Cycle" button till the corresponding indicator is light. Refer to the " Cycle " button on Page 12. 3. Push the button,select suitable water level After switching on the power, when the normal program is selected , the washing machine will execute fuzzy program automatically to detect the cloth .After detection, it can set the water level automatically. To select other water level, first push the "START/PAUSE" button, then push the "Water Level" button to set the water level. 4. Push the button to select suitable reserve wash program After switching on the power, the reserve time program is set to off mode automatically. If you need to set the washing procedure to be finished at delay time, please push the "Delay" button to set the reserve washing program. Refer to delay button in Page 12 for selection. When the "Delay" function is activated, the indicator light of the program you have set will be off. The "Delay (Hours) " and "Remaining(Minutes)" indicator lights will be on. During reserve procedure, push the "Delay" button to display the relay mode. To change the running program or cancel the relay setting, you need to switch off the power and make new selection. 5. Push the button,close the top lid If the top cover is opened , the washing machine will stop running and tweet during spinning, then close the lid,you must push the START/PAUSE again to continue running. Finish washing The machine will beep to indicate the end of the cycle then automatically cut the power off 13 Product Overview Outer tub cover Balance ring Control panel seat Control panel film Lint filter Filter cover Cabinet Adjustable foot Top lid component Water inlet valve water absorption gasket Power cord Inner tub Hook Pulsator back cover Drain hose Cabinet handle fixed foot(2 pieces) Base frame Description of symbols Warning sign Forbidden sign an injury to the 2