Haier HWM60-M1201 User Manual - Page 6
Installation and Adjustment, Loading your laundry
View all Haier HWM60-M1201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Installation and Adjustment Please install and adjust the machine according to the directions contained in this manual. It is very important to follow these directions for the safe operation of the machine,and to ensure your machine operates correctly. Install the bottom plate The purpose of the bottom plate is to suppress noise from the washing machine during operation. Steps: Screw 1.Lay the washer on its back,on a non-abrasive surface. 2.Insert the bottom plate to the bottom of the machine. 3.Use a screwdriver to tighten the screw(in accessory bag) securing the plate to bottom of the washer. 4.Once the screw is tight and the plate is secure,return the washer to its standing position. Bottom plate Front Back Carpet Balance washing machine Do not install this machine on an incline greater than 2°. Installing machine on an angle or on rough ground will result in unstable running or stoppage of the machine. Please adjust it by the following method: 1.Confirm it is level; 2.Lift up the side of the leg slightly and twist the adjustable leg. Note: The distance between the washing machine and wall: at least 20mm. Loading your laundry The rated washing capacity refers to the largest dry weight of a load that can be washed or spinned in one time. One time washing quantity shall be lower than the rated capacity. The thickness, size and type of clothes will influence the actual capacity. Do not select the high water level for clothes less than 1.0kg, to avoid splashing of water. It is recommended that low suds/high efficiency washing powder is used. Detergent Usage Guide Adding washing powder It is suggested to dissolve detergent before adding to the tub,see as below: It is suggested 1.Prepare warm water (