Haier HWM60-M1201 User Manual - Page 4
Dismantle, Install
View all Haier HWM60-M1201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Install Up Dismantle Down Power A " Power "button Power Power Start Pause B " Start Pause "button After the power is switched on,press it to start the machine . During working, push it to pause. During pause,push it to restart and go on working. Cycle C " Cycle "button Program Application Program Just run the washing cycle without drainage cycle. The detergent was left in the tub and can be recycled. Application Remove the left detergent from the clothes and then rinse the clothes. start extraction program when the wash program ends or the clothes are wet. Washing the relatively big thick or very dirty laundries. The purpose is drying the inner tub and the outer tub,which can avoid growing mildew. D " "button During operation,the digitron tube will display the remained time (hours). Push down the delay button. The delay indicator light is on ,the digitron displays the delay time of finishing washing (in hour).The point light flashs to indicate in the reverse mode. E " "button