Haier HWM65TLF User Manual - Page 19

Water Inlet Water Supply Hose Goose Neck Hose Bend Drain Hose 5.Plug in the washer to a regular 230-240Volt/50Hz,10Amps outlet. Note :Carefully inspect all around the machine and at the back for any leaks, and tighten any loose connections. Caution: If after completing these steps, you are unsure that unit is properly installed, contact a qualified installer.To ensure that your washer is properly installed, it is recommended that it be installed by a certified installer. ELECTRICAL REQUIREMENTS Grounding Instructions This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounded plug. The plug must be inserted into an outlet that is properly installed and grounded. • Improper use of the plug can result in a risk of electric shock. Consult a qualified electrician or service person if the grounding • instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. Wiring Requirements: The• washer must be plugged into at least 10AMP 230-240 VOLT, 50 HZ GROUNDED OUTLET. 18