Haier HWM65TLF User Manual - Page 8

Gentle Cycle Washing the woollen textile or underwear Quick Cycle Quick washing of the light dirt laundries only 29 minutes PROCESS Button:(5) SOAK This is to select washing process. WASH RINSE SPIN Soak will not work in Quick Cycles. PROCESS Water level indicator will shut off if only Spin is selected. WATER LEVEL Button:(6) Water levels may be set at the beginning of the wash or at pause. LARGE MEDIUM During Soak, Wash or Rinse press this button to manually SMALL replenish water. Release to stop. WATER LEVEL Function automatically is inactive when water reaches the overflow protection level. TEMP SELECT Button:(7) To select inlet water temperature for wash and rinse. HOT WARM Initial setting is warm/cold when washer is powered on. COLD Press button to change selection based on clothes put TEMP SELECT in the washer. Operating Procedure 1.Press power on button The washer will now be in the working status in the Normal cycle. If the Start/pause button is not pressed with in 5 minutes after power on the unit it will automatically switch off and return to the stand by mode. The washer will also return to the stand by mode immediately after completion of the wash process. Regardless of the settings by pressing the power on/off button all programs will stop and return to the stand by mode. 2.Selection Cycle When the washer is powered on the Normal cycle is the default cycle. If other cycle is required press the cycle button for desired program. 3.Process Select Once the power is switched on the washing machine will automatically set the Normal cycle which will Wash ,Rinse and Spin. If other selection combinations are desired, press the process select button to choose. 7