Haier HWM65TLF User Manual - Page 9

Note: Spin shall begin after sometime even if there is no water in the tub. Do not use soak process for woolen clothes. Clothes prone to fading should be washed separately. 4. Water Level Selection After Cycle selection press the Water Lever button to select the proper Water Lever for wash. Note: See chart below for Load Size selection. The Capacity of Washing (kg.) 3.5~6.5 2.0~3.5 Below 2.0 Water Level Water Quantity Large About 76L Medium About 56L Small About 35L 5.Temp of Wash and Rinse Water Selection Initial setting Warm/Cold when washer is powered on. Press button to change selection based on clothes put in washer. 6. Delay Start To start the washer at a later lime press the Delay Start button and set the time. When activated the indicator displays 2. Push button once for every 1 hour delay for up to 24 hours. Press start button to activate Delay Start. When the delay timer starts the program select indicator turns off. The indicator will display the remaining time to turn on the unit. In the lower right corner of the display, a blinking light will indicate that Delay Start has been activated. By pressing the Delay/Start button the selected Process programs will be displayed. By altering the running program, the washer will have to be reset. 7. Start/Pause Press this button when you want the machine to start. During operation press this button to pause and press it again to resume operation. Note: By opening the top lid will stop the machine except for water filling or draining. 8