Haier HWM75-0528A User Manual - Page 6

Installation and adjustment

Get Haier HWM75-0528A PDF manuals and user guides View all Haier HWM75-0528A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

Installation and adjustment Please install and adjust the machine according to the requirement of the mannual. It is very important to your security and correct operating the machine. Install the lint filter 1.Press downward to assemble. 2.Pull upward to detach. Install the bottom plate After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth,blanket, etc. ). Install the bottom plate to the bottom of the machine with the eight screws by a cross screwdriver, then lift the machine up gently. See to the figure: Back Front Soft items Screw Bottom plate Adjust the Installation position The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal. Adjust the adjustable leg: 1 .To twist the adjustable leg, please first lift up the side of the leg slightly, loosen the adjustable nut, and twist the leg. 2 . After adjustment, fasten the nut. Loosen High the adjustable nut Fasten Low the adjustable leg 3 Push the " WATER LEVEL "button,select suitable water level After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth. After defection, it can set the water level automatically. To select other water level, first push the "start/pause" button, then push the "water level" button to set the water level. 4 Push the "PROGRAM/RESERVE" button to select suitable reserve wash program After switching on the power, the reserve program is set to off mode automatically. If you need to set the washing procedure to be finished at reserved time, please push the "PROGRAM/RESERVE" button to set the reserve wash program two seconds. Refer to "PROGRAM/RESERVE" button in Page 11 for selection. 5 Push the "Start/Pause" button the washing will be finished after 18 hours. 6 Finish washing After finishing wash it will switch off power automatically

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
Back
Front
Soft items
Screw
Bottom plate
The largest allowable slope of the shank base of the machine is 2
.The slanting or rough ground will result in
unstable running or stoppage of the machine. Please adjust it with following methods:
Confirm it's horizontal:
Hang the lead line to check if it is
horizontal.
Adjust the adjustable leg:
Fasten
Loosen
High
Low
the adjustable nut
the adjustable leg
1 .To twist the adjustable leg, please first lift up the
side of the leg slightly, loosen the adjustable nut,
and twist the leg.
2 . After adjustment, fasten the nut.
Please
install and adjust the machine according to the requirement of
the mannual.
It
is very
important
to your security
and
correct operating
the machine.
Adjust the Installation position
Installation and adjustment
3 Push the " WATER LEVEL "button,select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect the cloth.
After defection, it can set the water level automatically.
To select other water level,
first push the
"start/pause"
button, then push the
"water level"
button to set the water level.
4 Push the "PROGRAM/RESERVE" button to select suitable reserve
wash program
After switching on the power, the reserve program is
set to off mode automatically. If you need to
set the washing procedure to be finished at reserved time, please push the "PROGRAM/RESERVE"
button to set the reserve wash program two seconds. Refer to "PROGRAM/RESERVE"
button in Page 11 for selection.
5 Push the "Start/Pause" button
6 Finish washing
After finishing wash
it will switch off power automatically
Install the bottom plate
After
you
open
the package, please lean
the washing machine gently down on soft
items ( like the towel cloth,blanket, etc. ).
Install the bottom plate to
the bottom of the
machine
with
the
eight screws
by a cross
screwdriver, then lift the machine up gently.
See to the figure:
1.Press downward to assemble.
2.Pull upward to detach.
Install the lint filter
the washing will be finished after 18 hours.