Haier HWM75-0528A User Manual - Page 9
Use the, operation buttons
View all Haier HWM75-0528A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
5 Use the operation buttons a Description of operation button Indicator mode and meaning Off: Flashing: indicate the running program On: indicate the program about to run, or indicate the selected mode Program STANDARD SOAK HEAVY GENTLE SAVE COTTON SINGLE WASH RINSE SPIN SINGLE SPIN TUB CLEAN AIR DRY INDICATION OF PROCESS (NO CHOOSING) SOAK WASH RINSE SPIN START PAUSE TIME REMAINED RESERVE START/PAUSE button After the power is switched on,press it to start the machine During working,push it to pause. During pause,push this button to restart and go on working Attention: 1. The digitron displays the remained time and process alternately during the washing machine working. 2. The process function is not selected solely .(see to Page 12) Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. jointer of the water inlet valve nut of the water inlet hose water absorption cushion. Connection between the jointer of the water inlet hose and the water inlet hose 1.Push down the slider. Insert the water inlet hose into the jointer. 2 Hang the lock lever to the jointer. Release the slider till a click Locking level sound is heard. the jointer of the water inlet hose Slider Check the connection between the jointer of the water inlet hose and the water faucet 1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position. Dismantle the water inlet hose 1. Close the water faucet. 2. Press the locking lever. Push down the slider. Then pull of the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw. Locking level Slider