Haier HWM80-000S Operation Manual - Page 5

Before Using Installation and adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. -1 1. The height of the drain hose shall be less than 10cm, or the drainage will not be smooth enough and cause incomplete drainage. -2 2. Do not tramp on or press the drain house. -3 3. If the drain hose is too long, cut it at mid point. To make smooth drainage, cut the front end of the hose slantingly. -4 4. If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. -5 5. If extra drain hose is too long, cut it either at point A or B. 5 Before Using Installation and adjustment How to Change the direction of the drain hose -1 1. Figure 1 indicates the ex-factory installation position of the drain hose. Extend the drain hose from the side of spin tub -2 2. Put soft items on the ground. Lean the machine down gently with the front surface facing the ground. Take off the drain hose from the cabinet. Take the hose out of the fixing groove. (See to Figure 2). ÅO$¦J- 3Ð1._Æ3^Ãi +ge -3 XNYDÎ~M m s§ 3. Embed the drain hose into the groove along the side of the spin tub in the order of (1)~(3), heading for the side of the spin tub. (See to Figure 3). 4. 4. Embed the drain hose into the groove with hands. Take care not to damage the drain hose in fastening the fixing clamp. 6