Haier HWM80-000S Operation Manual - Page 9

Using Process Washing sequence 3. Run the foam-removing spinning. -3 (1) Set the water-filling selector control red at the "SPIN" side. Fill water for about 1 minute. If the water quantity filled is to large, the water may flow out from the wash tub side. Please twist the water tap to limit the water filling. (2) Close the outer cover of the spin tub. Spin for 1-2 minutes. WASH SPIN Rinsing Rinse with water-filling 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Adjust the water level Set the water level with water level adjusting 2. lever according to the laundries quantity. Then fill suitable water continuously. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. 3. (Repeat the midway spinning and rinsing with stored water for 2-3 times) Rinse with stored water 1. 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 2. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. 3. When the laundries quantity is below 2-3kg, please us "STANDARD" current. If you use "STRONG" current, it may splash. 13 Using Process Washing sequence Spinning 1. Put the laundries into the spin tub -1 evenly and smoothly. -2 2. Press the grand in the tub properly. Close the inner and outer cover of the spin tub. -3 3. Spin Select suitable spin time according to the laundries, and do spinning. During spinning, if there's abnormal sound, it is generally owing to slanting placement of the laundries. Please stop the machine and re-order the laundries. Note: In spinning, it will pause the work if you open the outer cover of the spin tub. Close it to resume the spinning. Selection of the Spin time list 3. Laundries Spin time (minutes) bed sheet or blanket About 4~5 Underwear (knitwear) About 2~4 Swear (chemical fiber) About 1~2 Blending thin laundries Within 1 minutes To do spinning and draining or rinsing with water-filling together, please first do spinning for around 1 minute, then do draining or rinsing with waterfilling. Otherwise the spinning will stop owing to too much water stored in the spin tub. 14