Haier HWM80-316S6 HWM80 90 100 120-316S6 User Manual - Page 15

Operation "Set" button Press the "Set" button,User can adjust "Water level" , "Sock time", "Wash time" , "Rinse times" , "Spin time" , "Delay time". Tub clean Hold "Set button" 3 seconds to select the tub clean procedure. You can use this function to clean the inner tub and outer tub of washing machine. Spin alternately, and the total soak time is 10 hours to make sure better clean effect. Do not put clothes during tub clean process. Delay Delay refers to the total time required for the program to run after the user has set the delay. Hold "Program" button 3 seconds, the digital displays "00" and the reservation indicator light. When pressing other buttons to set parameters and select programs, exit the delay setting mode. If no operation is done in 3 seconds in the reservation setting mode, exit the delay setting mode. Tub clean can not select Delay. Button Operation and Descriptions 1. Press the button to switch on the power. 2. Press the button to select suitable automatic program. After the power is switched on, "Normal" is automatically set. To select other program, please press the "program" button till the corresponding indicator is light. Refer to the "program" button on page 12. 3. Press the button to select different setting. 4. Press the button to freeze water level, wash time, rinse times and other parameters. 5. Close the top lid, Press the button. Cycle completed When the machine has completed the selected/current wash cycle an audible alarm will be heard and the machine will automatically switch off. 13