Haier HWM80-316S6 HWM80 90 100 120-316S6 User Manual - Page 8
Usage of the drain hose, Inlet hose connection
View all Haier HWM80-316S6 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Installation and adjustment Usage of the drain hose The drainage shall be smooth with the drain hose. 1.The height of the drain hose shall be 4.If extra drain hose is needed, please less than 10cm, or the drainage will not be make separate purchase.The inner smoothđand the machine will take a long diameter of the extra hose shall not time to stop in the middle. less than 30mm,and the length shall not exceed 1.5m. 2.Do not trample or press the drain hose. 5.If the extra hose is too long, cut it either 3.If the drain hose is too long, cut it at mid at A or at B point. point. To make smooth drainage,cut the front end of the hose slantingly. AB Note: Connect the main hose with the detachable water hose according to the instructions, use the hose that comes with the machine, do not reuse the old hose. Inlet hose connection The new hose-sets supplied with the appliance are to be used and that old hose-sets should not be reused. Confirm the water faucet water faucet,suitable The exit end face of the faucet water faucet, not suitable It is required that the front end shall be longer than 10mm. The exit end face of the faucet shall be flat and smooth. If not, please fix it to avoid leakage. 6