Haier HWM80-316S6 HWM80 90 100 120-316S6 User Manual - Page 7

Installation and adjustment Please install and adjust the machine according to the directions contained in this manual.It is very important to follow these directions for the safe operation of the machine,and to ensure your machine operates correctly. Install the bottom plate The purpose of the bottom plate is to suppress noise from the washing machine during op eration. Steps: 1. Lay the washer on its back, on a nonabrasive surface. 2. Place the plate onto the bottom of the machine. 3. Use a screwdriver to tighten the screw ( in accessory bag) securing the panel to bottom of the washer. 4. Once the screw is tight and the panel is secure, return the washer to its standing position. Screw Front Screws Front Back Back Bottom plate Carpet (HWM80-316S6aHWM90-316S6aHWM120-316S6) Bottom plate Carpet (HWM100-316S6) Balance washing machine Do not install this machine on an surface which greater than 2°. Installing machine on a inclined surface or on unflat ground will result in unstable running. Please adjust it by the following method: 1.Confirm it is horizontal. 2.Lift up the side of the leg slightly and twist the adjustable leg. Note:The distance between the washing machine and wall should be at least 70 mm. 70 5