Haier LT19M4 User Manual - Page 21

9.Timeshift function 1.Prepare to record the program This TV allows you to pause and record the currently watched digital program to a USB storage device, and to resume to the point where it was paused. NOTE: Formatting a USB 2.0 storage device will be needed. Save your original data before formatting. All the data stored in the USB device will be erased after formatting. Sleep timer will be suspended if it had been set before activating the Time Shift function. USB Drive Storage Format Select to format the USB device and allocate the amount of space for the Time Shift function. NOTE: The format process will take at least 2 minutes. Please do not turn off the power or remove the USB device during formatting. During formatting, a speed test will be done on the USB device. If it fails, it means the USB device may not support the Time Shift function. Record a paused DTV program to USB storage device 1. While in the DTV input source, insert USB storage device to the USB port on the side of your TV. 2. Press PAUSE 33 to start Time Shift function. The TV program paused. The Time Shift OSD appears, and starts recording. 3. Press STOP 29 to stop Time Shift function and stop recording program. SUBPAGE SIZE MIX SUBTITLE 00:00:33/00:04:22 Play FB FF Prev . Ne xt Pause Stop NOTE: Please do not unplug the USB storage device when the Time Shift function is activated. Approximately 4GB of memory buffers about offer 140 minutes. REC/REP 33 04 Operation BUSH|HD Ready Digital LED LCD TV | User Manual | Helpline:0845 604 0105 P.20