Haier QDP555SBNTS Installation Instructions - Page 2

Installation Preparation PARTS SUPPLIED IN INSTALLATION PACKAGE: • Junction box cover and #10 hex-head screw • Hose clamp • Drain hose (approximately 58" long) • Drain hose hanger Junction Box Cover #H10exh#e-1Hx0escardew Junction Box Screw 1/2" long • 2 #8-18 hex head screws to secure brackets to washer tub frame • 1 top trim piece (on some models) • 2 side trim pieces • 2 mounting brackets for wood countertops Top Trim Piece (on some models) Hose Clamp Drain Hose Hanger Drain Hose #8 Hex-Head Mounting Bracket Screws or side cabinets • 2 #8-18 x 5/8" Phillips special head screws, Side Trim Pieces to secure dishwasher to underside of countertop or to side cabinets • Plug buttons Mounting Brackets • Literature, samples and/or coupons #8 Phillips Special Head Screws 5/8" long Plug Buttons Literature MATERIALS YOU WILL NEED: • 90° elbow (3/4"hose internal thread on one end,opposite end sized to fit water supply) • UL-listed wire nuts (3) • Masking Tape 90°Elbow Wire Nuts (3) Masking Tape Materials For New Installations Only: • Air gap for drain hose, if required Coupler for optional drain hose • Waste tee for house plumbing, if applicable • Electrical cable or Power Cord Kit WX09X70910 (5.4 Ft) or WX09X70911 (7.9 ft) depending on your installation. • Hose clamp (if needed for optional drain hose) • Strain relief for electrical connection Waste Tee Air Gap Electrical Cable (or Power Cord, if applicable) Hose Clamp • Hand shut-off valve (recommended) • Hot Water Line-3/8" minimum, copper tubing (including ferrule, compression nut) or GE Appliances Part # WX28X326, flexible braided hose. • WD24X10065 drain hose (12' long), if needed. Strain Relief Hand Shut-Off Valve Hot Water Line Optional 12' Drain Hose WD24X10065 Drain Hose 10ft. TOOLS YOU WILL NEED: • Phillips-head screwdriver • 1/4" and 5/16" nutdriver Phillips-Head • 6" Adjustable wrench Screwdriver • Level • Carpenter's square • Measuring tape • Safety glasses • Flashlight • Bucket to catch water when flushing the line 15/16" Socket • 15/16" socket (optional for skid removal) • Gloves • Pliers 1/4" and 5/16" Nutdriver Pliers Tubing Cutter Measuring Tape For New Installations Only: • Tubing cutter • Drill and appropriate bits • Hole saw set Flashlight 6" Adjustable Wrench Drill and Bits Safety Glasses Hole Saw Set Level Carpenter's Square Gloves Bucket 2