Haier QFT15ESSNWW Installation Instructions - Page 18

ENGLISH INSTALLATION INSTRUCTIONS CONNECTING THE DRAIN HOSE DRAINING WATER WITHOUT USING THE WATER TANK You can use the dryer without using the water tank by following the procedures below. CONNECTING THE DRAIN HOSE The dryer can pump the condensed water outside of the DRYER directly with drain hose provide. The procedures to connect the drain hose are as follows. CONNECTING THE DRAIN HOSE (CONT.) 4. Over the edge of a wash basin: The drain hose must be placed lower than 47" (120 cm) and higher than 30" (76 cm). To keep the drain hose spout bent, use the supplied plastic hose guide. Secure the guide to the wall with a hook or to the tap with a piece of string to prevent the drain hose from moving. 5. Assemble the drain hose and the hose guide and fix them with the cable-tie. Drain Hose Hose Guide Back View Cable Ties 47" (120 cm) Max. 1. Disconnect the drain hose A. Do not push the drain hose in the standpipe any further than 4" (10 cm). Pushing the drain hose further in the A standpipe can cause leaking. 2. Connect the drain hose A to the other hole. A 3. Connect accessory hose B (long drain hose) adjacent to hose A. B • When connecting hose B, take care that the height of the hose does not exceed 47" (120 cm). • After connecting the drain hose, you can now directly drain the condensed water to a standpipe or washstand. 18 49-3000193