Haier SC-310 User Manual - Page 8
EMS-55 display
View all Haier SC-310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Preparations before operation Removing all package materials Including foam pedestal, adhesive tape (to fix accessories), and protection gaskets. Footing adjustment Stably adjust footing according to the ground condition to reduce possible vibration and noise. Installation of Bumper bar Take Bumper bar (2 pieces) outside from the operation manual bag; separately screw them in M8 holes clockwise at middle and lower part of refrigerator back until they are fixed. Clean the refrigerator before operation Standing After being moved, the refrigerator should be standing for more than 30 minutes before being connected to power. Plug in Plug in to make a trial operation, then check the EMS display of temperature inside the cabinet. If the temperature drops continuously without alarm, it means refrigerator runs normally Disassembly of Light canopy and instruction As top-placed independent light canopy, products SC-310/410/510 can be disassembled; Disassembly of top-placed independent light canopy. Light canopy is at the front top. Screw off thumbscrews at left/right ends Pull out connection terminal between light canopy and freezer, then the light canopy can be disassembled The processing of assembly is just the reverse to disassembly. EMS-55 display Equipment instruction EMS-55 is a control system especially developed for Coca Cola Company. The system consists of energy saving controller, transformer, and temperature sensing probes (2), magnetic spring switch (2), and auxiliary lines. By self-learning from ambient (population flow, open/close times of door and working time etc), EMS_55, could establish automation module, with which it could also adjust freezer operation status automatically to adapt to actual operation mode. This control system changes the traditional mode operated by temperature controller, and makes it easy to operate and realizes automatic alarming, meanwhile it also extends refrigerator's life, reduces the repair rate and achieves energy saving. Display instruction Letters displayed on EMS have the following meaning Note: At edition E43 it shows USE for EMS's operating status; At edition E46 it shows current temperature in refrigerator under normal operating status. 7 12