Haier UVH13012MSS Use and Care Manual - Page 10
Installation Instructions, IMPORTANT SAFETY INSTRUCTIONS, INSTALLATION INSTRUCTIONS
View all Haier UVH13012MSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
INSTALLATION INSTRUCTIONS Installation Instructions IMPORTANT SAFETY INSTRUCTIONS GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. WARNING Improper grounding can result in a risk of electric shock. Consult a qualified electrician if the grounding instructions are not completely understood, or if doubt exists as to whether the appliance is properly grounded. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance. Where a standard two-prong wall receptacle is encountered, it must be replaced with a properly grounded three-prong wall receptacle, installed by a qualified electrician. WARNING Risk of Electric Shock. Can cause injury or death: DO NOT, under any circumstances, cut, deform or remove any of the prongs from the power cord. Failure to comply may cause fire. CAUTION For personal safety, the mounting surface must be capable of supporting the cabinet load of this 75 pound product. CAUTION For personal safety, this product cannot be installed in cabinet arrangements such as an island or a peninsula. It must be mounted to BOTH a top cabinet AND a back wall. CAUTION To avoid the risk of personal injury (back injury or other injuries due to excessive weight of the product) or property damage, you will need two people to install this product. ELECTRICAL REQUIREMENTS 120 V Models This product requires a three-prong grounded outlet. Product rating is 120 volts AC, 60 Hertz. This product must be connected to a supply circuit of the proper voltage and frequency. Wire size must conform to the requirements of the National Electrical Code or the prevailing local code. The outlet box should be located in the cabinet above the unit and away from any potential ducting. The outlet box and supply circuit should be installed by a qualified electrician and conform to the National Electrical Code or the prevailing local code. 10 49-2000492 Rev. 2