Haier UVH13012MSS Use and Care Manual - Page 16

Installation Instructions, PLACEMENT OF THE MOUNTING PLATE Cont., INSTALLATION INSTRUCTIONS

Get Haier UVH13012MSS PDF manuals and user guides View all Haier UVH13012MSS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

INSTALLATION INSTRUCTIONS Installation Instructions 1. PLACEMENT OF THE MOUNTING PLATE (Cont.) D ALIGNING THE MOUNTING PLATE 30" Hole A Draw a Vertical Line on Wall from Center of Top Cabinet Hole B Hole C Area E Notch Hole D CAUTION Wear gloves to protect against sharp edges. 1. Draw a vertical line on the wall at the center of the ƎZLGHVSDFH 2. Use the mounting plate as the template for the rear wall. Place the mounting plate on the wall, making sure that the tabs are touching the bottom of the cabinet or the level line drawn in Step C for cabinets with front overhang. Line up the notch and center line on the mounting plate to the center line on the wall. 3. While holding the mounting plate with one hand, draw circles on the wall at holes A, B, C, and D (see illustration above/actual plate marked with arrows). Four holes must be used for mounting. NOTE: Holes C and D are inside area E. If neither C nor D is in a stud, find a stud somewhere in area E and draw a fifth circle to line up with the stud. It is important to use at least one wood screw mounted firmly in a stud to support the weight of the unit. Set the mounting plate aside. WARNING Risk of electric shock. Can cause injury or death. Take care to not drill into electrical wiring inside walls or cabinets. 4. Drill holes on the circles. If there is a stud, drill a ƎKROHIRUZRRGVFUHZV)RUKROHVWKDWGRQ¶WOLQH XSZLWKDVWXGGULOODƎKROHIRUWRJJOHEROWV NOTE: DO NOT MOUNT THE PLATE AT THIS TIME. 16 49-2000492 Rev. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
16
49-2000492
Rev. 2
Installation Instructions
D
ALIGNING THE MOUNTING PLATE
CAUTION
Wear gloves to protect against
sharp edges.
1.
Draw a vertical line on the wall at the center of the
2.
Use the mounting plate as the template for the rear
wall. Place the mounting plate on the wall, making
sure that the tabs are touching the bottom of the
cabinet or the level line drawn in Step C for cabinets
with front overhang. Line up the notch and center line
on the mounting plate to the center line on the wall.
3.
While holding the mounting plate with one hand,
draw circles on the wall at holes A, B, C, and D (see
illustration above/actual plate marked with arrows).
Four holes must be used for mounting.
NOTE:
Holes C and D are inside area E. If neither
C nor D is in a stud, find a stud somewhere in area
E and draw a fifth circle to line up with the stud. It is
important to use
at least one wood screw mounted
firmly in a stud
to support the weight of the unit.
Set the mounting plate aside.
WARNING
Risk of electric shock. Can cause
injury or death. Take care to not drill into electrical
wiring inside walls or cabinets.
4.
Drill holes on the circles. If there is a stud, drill a
NOTE: DO NOT MOUNT THE PLATE AT THIS TIME.
1. PLACEMENT OF THE MOUNTING PLATE (Cont.)
Draw a
Vertical Line
on Wall from
Center of Top
Cabinet
Area E
Hole A
Hole B
Hole D
Notch
Hole C
30”
INSTALLATION INSTRUCTIONS