Hamilton Beach 10090 Use & Care - Page 5

840124300 ENv02.qxd 3/16/04 9:28 AM Page 8 To Remove Lint 1. Lint and hair may be removed from fabrics with the lint pad by brushing the pad across fabric slowly from left to right. 2. To clean lint pad, brush on scrap fabric or towel from right to left. Fabric Setting Chart To Iron Temp Steam Control Setting Ironing Instructions Nylon • Silk • Acrylic •• Polyester •• Wool ••• Dry iron on the wrong side of the fabric. Dry iron on the wrong side of the fabric. Dry iron on the wrong side of the fabric. Iron with fabric still damp. Steam iron on the wrong side of fabric. Rayon ••• Cotton ••• Linen ••• Iron on the wrong side of fabric. Iron while still damp using steam and/or spray. Iron on wrong side of fabric while still damp. Caring for Your Travel iron/steamer 1. The Water Tank of your travel iron/steamer should be emptied after each use. Turn Temperature Control Dial to OFF (O). Unplug the travel iron/steamer and hold over a sink. Turn travel iron/steamer nose down until Water Tank Opening is parallel with sink. Water will run out of Water Tank Opening. 2. To store the travel iron/steamer after it has completely cooled, press Handle Release Button and rotate the handle until it locks (180 degrees) so that the handle is parallel over the travel iron/steamer. 3. Put Brush Attachment over the soleplate and engage the lock. 4. Place the travel iron/steamer in the storage bag and store resting on its side. Do not store travel iron/steamer laying flat on soleplate. Soleplate 1. Never iron over zippers, pins, metal rivets, or snaps, as these may scratch the soleplate. 2. To clean occasional build-up on the soleplate, wipe with a sudsy cloth. Do not use abrasive cleansers or metal scouring pads. 3. Always store travel iron/steamer resting on its side. 8 9