Hamilton Beach 40715 Use & Care - Page 6

840181701 ENnv01.qxd:Layout 1 6/17/09 11:34 AM Page 6 How to Use OR 1 Make sure all three buttons are in the OFF position (not pushed in) and that the steam control dial is turned fully clockwise to NO STEAM . 2 Fill the removable water reservoir with desired amount of cold water and replace securely on the back of unit. 3 4 Align raised dimple on the exterior of espresso/pod filter holder with cutout notch on inside of filter holder. Rotate expresso/pod filter holder 180º to secure in base. Place ground espresso holder into filter holder. Add one tablespoon of ground espresso for each cup being made. Use shallow holder for 1 cup and deep holder for 2 cups. Press grounds firmly into holder with tamping tool. Place pod into filter holder. When using single-serve pod, always use the shallower espresso/ pod filter holder. Never put two pods in either filter holder at one time. 5 Holding handle securely, insert filter holder into brew head with handle pointing left. Ensure no grounds are on rim of filter holder. 6 6 Rotate the filter holder to the right until it is firmly locked into place. 7 Plug in and press ON/OFF button to turn unit on. When ready, the light next to the temperature control button will glow green. 8 Place one or two cups under brew head spouts. If using one cup, use one wide enough to catch espresso from both spouts.