Hamilton Beach 40715 Use & Care - Page 9

840181701 ENnv01.qxd:Layout 1 6/17/09 11:34 AM Page 9 How to Froth Milk 1 Ensure there is water in the removable water reservoir and move the frothing nozzle to the right of the unit. 2 Plug unit in; press ON/OFF button to begin heating water. When heated, the light next to temperature selection button will glow. 3 Press the temperature selection button. 4 Turn the steam control dial clockwise to NO STEAM . 5 Fill a metal or ceramic cup 1/3 full with cold milk. A stainless steel cup and skim milk are recommended. 6 7 8 Hold cup underneath frothing nozzle, leaving about 1/4 to 1/2 inch between the nozzle and the bottom of the cup. Rotate steam control dial about 3/4 turn toward steam. Hold cup under frothing nozzle until desired consistency is reached. Froth should be stiff and scoopable with a spoon. Turn steam control dial to NO STEAM . Press ON/OFF button (light will go out); then press temperature selection button again to turn off steam temperature. Unplug unit from outlet. Clean the frothing nozzle after each use. 9