Hamilton Beach 40715 Use & Care - Page 8

840181701 ENnv01.qxd:Layout 1 6/17/09 11:34 AM Page 8 How to Steam Milk w WARNING Burn Hazard. Vapor and water emitted from frothing nozzle are hot. 1 Ensure there is water in the removable water reservoir and move the frothing nozzle to the right of the unit. 2 3 Plug unit in; press ON/OFF button to begin Press the temperature selection button. heating water. When heated, the light next to temperature selection button will glow. 4 Turn the steam control dial to NO STEAM position . 5 Fill a metal or ceramic cup 1/3 full with cold milk. A stainless steel cup and skim milk are recommended. 6 Hold cup underneath frothing nozzle, leaving about 1/4 to 1/2 inch between the nozzle and the bottom of the cup. 8 7 Turn steam control dial counterclockwise to open steam valve. Milk is steamed when cup becomes warm. NOTE: After each time steaming and to prevent clogging nozzle, hold a cup with water under nozzle and "steam" into the cup to clean. 8 Turn steam control dial to NO STEAM . Press ON/OFF button (light will go out); then press temperature selection button again to turn off steam temperature. Unplug unit from outlet. Clean the frothing nozzle after each use.