Hamilton Beach 75224 User Guide - Page 3

840122100 ENv01 2/25/04 11:06 AM Page 4 Hints for Best Use • The can opener will easily open all standard size cans. • On some models it will be necessary to position can opener at edge of counter, allowing for clearance to open cans taller than the can opener. • If there is a bump, dent, or heavy seam in rim of can, open other end of can or start cutter just beyond it. • Cans made with aluminum lids will not adhere to magnet. • The motor of your can opener is permanently lubricated and will require no oiling. • To use cord storage on back of opener, push in or pull out cord as needed. Cleaning Your Can Opener 1. Unplug cord from electrical outlet. 2. Remove complete cutting assembly as shown. Push piercing lever up and to the left. It will pop out of a locked position. 3. Wash cutting assembly in hot, soapy water. Rinse and dry thoroughly. 4. Wipe body of can opener with damp cloth. NEVER immerse the can opener in water. 5. To reassemble, place knob on back of cutting assembly into large end of keyhole as shown. Push to the right until it snaps into place. 4 Sharpening Knives This feature on selected models. 1. Place cutting edge of knife in knife slot located on back of can opener. 2. Draw knife blade through slot several times. NOTE: Serrated blades should never be inserted into this unit. 5