Harbor Freight Tools 38144 User Manual - Page 12

SAFETy Maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. TO pREVENT SERIOUS INJURy FROM AccIDENTAL OpERATION: Turn the power Switch of the tool off and unplug the tool from its electrical outlet before performing any procedure in this section. TO pREVENT SERIOUS INJURy FROM TOOL FAILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. cleaning, Maintenance, and Lubrication 1. BEFORE EAcH USE, inspect the general condition of the tool. Check for: • loose hardware, • misalignment or binding of moving parts, • cracked or broken parts, • damaged electrical wiring, and • any other condition that may affect its safe operation. 2. AFTER USE, wipe external surfaces of the tool with clean cloth. 3. WARNING! If the supply cord of this power tool is damaged, it must be replaced only by a qualified service technician. Belt Inspection and Tensioning 1. Examine belt for cracks, tears in the backing, and other damage. 2. Replace belt if damaged, following the instructions under Changing Drill Speed on page 10. SETUp OpERATION MAINTENANcE Page 12 For technical questions, please call 1-888-866-5797. Item 38144