Harbor Freight Tools 61454 User Manual - Page 5

Grounding SAFETY SETUP OPERATION TO PREVENT ELECTRIC SHOCK AND DEATH FROM INCORRECT GROUNDING WIRE CONNECTION: Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the compressor. Never remove the grounding prong from the plug. Do not use the compressor if the power cord or plug is damaged. If damaged, have it repaired by a service facility before use. If the plug will not fit the outlet, have a proper outlet installed by a qualified electrician. 110-120 V~ Grounded Compressors: Compressors with Three Prong Plugs 1. In the event of a malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This compressor is equipped with an electric cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into a matching outlet that is properly installed and grounded in accordance with all local codes and ordinances. 2. Do not modify the plug provided - if it will not fit the outlet, have the proper outlet installed by a qualified electrician. 3. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. The conductor with insulation having an outer surface that is green with or without yellow stripes is the equipment-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipmentgrounding conductor to a live terminal. 4. Check with a qualified electrician or service personnel if the grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly grounded. 5. Use only 3-wire extension cords that have 3-prong grounding plugs and 3-pole receptacles that accept the compressor's plug. 6. Repair or replace damaged or worn cord immediately. Grounding Pin 125 V~ 3-Prong Plug and Outlet (for up to 125 V~ and up to 15 A) 7. This compressor is intended for use on a circuit that has an outlet that looks like the one illustrated above in 125 V~ 3-Prong Plug and Outlet. The compressor has a grounding plug that looks like the plug illustrated above in 125 V~ 3-Prong Plug and Outlet. 8. The outlet must be properly installed and grounded in accordance with all codes and ordinances. 9. Do not use an adapter to connect this compressor to a different outlet. Symbology PSI Pounds per square inch of pressure CFM SCFM NPT Cubic Feet per Minute flow Cubic Feet per Minute flow at standard conditions National pipe thread, tapered NPS National pipe thread, straight Double Insulated Canadian Standards Association V~ A Underwriters Laboratories, Inc. Volts Alternating Current Amperes Item 61454 For technical questions, please call 1-800-444-3353. Page 5 MAINTENANCE