Harbor Freight Tools 61614 User Manual - Page 12

SAFETY SETUp 23. Hold the fuel drain port over a bowl, and open the Carburetor Drain Plug (137a) to allow fuel to drain out of that port. Once the carburetor is empty, close the Carburetor Drain Plug. See Figure M. 26. Use a carburetor screwdriver (sold separately) to remove the Left Main Jet and replace it with the proper replacement Left Main Jet (A1 or A3) for the altitude. See Figure O. 27. Use a carburetor screwdriver to remove the Right Main Jet and replace it with the replacement Right Main Jet (A2 or A4) for the same altitude as the Left Main Jet. See Figure O. fuel drain port Carburetor Drain plug (137a) Figure M: Carburetor Drain 24. Turn the Carburetor assembly over. 25. Remove the four Carburetor Bowl Bolts (137b) and remove the Carburetor Bowl (137c). See Figure N. Right Main Jet (A2/A4) Carburetor Bowl Bolt (137b) Carburetor Bowl Bolt (137b) Left Main Jet (A1/A3) Carburetor Bowl (137c) Carburetor Bowl Bolt (137b) Note: Since carburetor is upside-down, left and right sides are reversed. Figure O: Main Jets Carburetor Bowl Bolt (137b) Figure N: Carburetor Bowl Bolts OpERATION MAINTENANCE Page 12 For technical questions, please call 1-888-866-5797. ITEM 61614