Harbor Freight Tools 61849 User Manual - Page 10

SAFETY SETUP BASIC WELDING WARNING The following steps require applying power to the Welder with the cover open. To prevent serious injury from fire or electric shock: 1. Do not touch anything, especially not the Ground Clamp, with the Gun or welding wire or an arc will be ignited. 2. Do not touch internal Welder components while it is plugged in. GUN 14. Do not touch the Gun's Trigger. Plug the Power Cord into its electrical outlet and turn the Welder to ON. 90 AMP FLUX WIRE WELDER ITEM 61207 ON MIN OFF MAX WIRE FEED SPEED Specifications Wire 0.030" - 0.035" Flux-Core Capacity 18 Ga. - 3/16" Steel Plate Weldable Mild, Low Alloy Steel Materials (Not for Aluminum or Stainless Steel) GROUND 120V~ 60Hz 20A 15. Point the Gun away from all objects and press the Trigger until the wire feeds out of the Gun two inches. The Wire Liner may come out with the welding wire, this is normal, just push the Wire Liner back into the Gun. If the wire does not feed properly and the Spool is stationary, turn the Welder to OFF, unplug it, and slightly tighten the Feed Tensioner clockwise before retrying. 2″ Welding Wire Gun WELDING TIPS MAINTENANCE Page 10 For technical questions, please call 1-888-866-5797. Item 61849