Harbor Freight Tools 61849 User Manual - Page 8

SAFETY SETUP Wire Spool Installation 1. Turn the Welder to OFF and unplug it before proceeding. 2. Press in the pin at the top center of the control panel and open the Cover. GUN 90 AMP FLUX WIRE WELDER ITEM 61207 ON MIN OFF MAX WIRE FEED SPEED Specifications Wire 0.030" - 0.035" Flux-Core Capacity 18 Ga. - 3/16" Steel Plate Weldable Mild, Low Alloy Steel Materials (Not for Aluminum or Stainless Steel) GROUND 120V~ 60Hz 20A Cover Wire Spool 3. Remove the Knob, Spring and the Top Plate. If replacing a Spool, remove the old Spool and all remaining wire from the liners. 4. Place the new flux-core Wire Spool over the Spool Spindle. To prevent wire feed problems, set the Spool so that it will unwind counterclockwise . Knob Spring Top Plate Wire Spool Spindle BASIC WELDING WELDING TIPS .030″ MAINTENANCE 5. Replace the Top Plate (turned as shown in illustration), the Spring and the Knob. wire must unwind in this direction Page 8 For technical questions, please call 1-888-866-5797. Item 61849