Harbor Freight Tools 62337 User Manual - Page 13

ASSEMBLY ASSEMBLE AS A MULCHER (See Fig. 3) 1. Slide the front and rear mulcher tubes together until the lock button engages. (See fig 2) 2. Pull the lock button forward to disengage the gate. Hold the gate open. (See fig 3.1) 3. Insert the "wedged" end clip of the mulcher tube into the rear clip. (See fig 3.2). Push the "hooked" end clip of the mulcher tube into the front clip. (See fig 3.3). Press the lock button back to engage the mulcher tube. (See fig 3.4) 4. To remove mulcher tubes, follow the steps (3) (2) (1). 5. Insert the bag adaptor into the blower outlet. Lock the bag adaptor with the lock button. To remove the bag, simply press lock button and remove bag. (see fig.5). NOTE: It may be necessary to remove the blower tube or mulcher tubes to clear a blocked tube or impeller. WARNING To prevent serious personal injury, make sure the switch is in the Off position, it is unplugged, and the impellers have stopped before attaching or removing tubes. fig.2 fig.3.1 ① Lock button fig.3.4 fig.3.2 fig.3.3 ② ③ fig.3.5 Item 62337 ④ ⑤ 13 For technical questions, please call 1-888-866-5797. Page 13