Harbor Freight Tools 62337 User Manual - Page 17

OPERATION AIR VENTS Never cover air vents. Keep them free from obstructions and debris. They must always remain clear for proper motor cooling. WARNING To avoid serious personal injury, do not wear loose fitting clothing or articles such as scarves, strings, chains, ties, etc., that could get drawn into the air vents. To make sure long hair does not get drawn into the air vents, tie back long hair. OPERATING AS A BLOWER Hold the blower firmly. Sweep from side to side with the nozzle several inches above the ground or floor. Slowly advance the unit, keeping the accumulated pile of debris in front of you. Most dry blowing operations are better suited to low speeds, rather than high. High speed blowing is a better way to move heavier items like large debris or gravel. OPERATING AS A MULCHER Hold the vac firmly, tilting the mulcher tubes (2-4 in. or 5-10 cm), and use a sweeping action to collect light debris. The debris will flow into the bag. Items such as small leaves and twigs will be mulched as they pass through the fan housing. for longer bag life and increased performance, empty the bag often. CLEARING A BLOCKED TUBE / IMPELLER WARNING To avoid serious personal injury, be sure the unit is Off and unplugged before clearing the impeller. WARNING To avoid serious personal injury, always wear gloves to protect yourself from the impeller blades or other sharp objects. 1. Slide the Power/Speed switch down to the Off position until the unit comes to a complete stop. 2. Unplug the unit. 3. Remove the blower tube or mulcher tubes and the bag. 4. Carefully remove material blocking the tube or impeller. Inspect the blades to ensure no damage has occurred. Rotate the impeller blades by hand to ensure the blockage is completely cleared. 5. Reinstall the blower tube or mulcher tubes and the bag. 6. Plug the unit back into the power supply. Item 62337 17 For technical questions, please call 1-888-866-5797. Page 17