Harbor Freight Tools 62337 User Manual - Page 19
Troubleshooting
View all Harbor Freight Tools 62337 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TROUBLESHOOTING PROBLEM Unit will not blow or mulcher. POSSIBLE CAUSE 1. Bag full 2. Blocked tube 3. Blocked impeller 4. Dirty bag 5. Torn bag 6. Bag unzipped 7. Unit unplugged SOLUTION 1. Empty the bag. 2. Clear the blockage. 3. Clear the blockage 4. Clean the bag. 5. Replace the bag. 6. Zip up the bag. 7. Plug into an outlet or an extension cord. Unit will not start. 1. Unit is unplugged. 2. Power/speed switch is in the Off position. 3. Defective power switch. 4. Vac tubes are not correctly installed. 5. Intake gate/cover is not closed. 6. House circuit may have tripped. 1. Check cord to make sure it is plugged into an electrical outlet. 2. Slide switch to high or low. 3. Call teocllhfnreicealhseulplpinoert:: 1-888-896069--56779577. 4. Check vac tubes to ensure that they are allowing the switch to be engaged when correctly installed. 5. Ensure that gate/cover is fully closed andlolocckkeedd.. 6. Check wall circuit breaker panel and reset if necessary. Item 62337 19 For technical questions, please call 1-888-866-5797. Page 19