Harman Kardon AVR 510 Owners Manual - Page 32

Once the change has been made, press the

Set

button

pÔ

and then press the

Selector

buttons

5

or the

⁄

/

¤

buttons

n

to select

the next output channel location that you wish

to adjust. To adjust the subwoofer level, press

the

Selector

buttons

5

or the

⁄

/

¤

buttons

n

until

WOOFER LEV

appears in the

Main Information Display

Y

or on-screen

display.

Press the

Set

button

pÔ

when the name of

the desired channel appears in the

Main

Information Display

Y

and on-screen dis-

play, and follow the instructions shown earlier

to adjust the level.

Repeat the procedure as needed until all chan-

nels requiring adjustment have been set. When

all adjustments have been made and no further

adjustments are made for five seconds, the

AVR 510 will return to normal operation.

The channel output for any input may also be

adjusted using the full-OSD on-screen menu

system. First, set the volume to a comfortable

listening level using the

Volume Control

Ó

î

. Then, press the

OSD

button

v

to bring up the

MASTERMENU

(Figure 1).

Press the

¤

Button

n

four times until the

on-screen

›

cursor is next to the

CHANNEL

ADJUST

line. Press the

Set

Button

p

to

activate the

CHANNELADJUST

menu

(Figure 8).

Figure 8

Once the menu appears on your video screen,

use the

⁄

/

¤

buttons

n

to move the on-

screen

›

cursor so that it is next to the channel

that you wish to adjust. Then, use the

‹

/

›

but-

tons

o

to raise or lower the output level.

Remember, the goal is to have the output level

at each channel be equal when heard at the

listening position.

When all adjustments are done, press the

⁄

/

¤

buttons

n

to move the on-screen

›

cursor so

that it is next to

RETURNTOMENU

and

then press the

Set

Button

p

if you wish to

go back to the main menu to make other

adjustments. If you have no other adjustments

to make, press the

OSD

button

v

to exit the

menu system.

NOTE:

The output levels may be separately

trimmed for each digital and analog surround

mode. If you wish to have different trim levels for

a specific mode, select that mode and then follow

the instructions in the steps shown earlier.

6-Channel Direct Input

The AVR 510 is equipped for future expansion

through the use of optional, external adapters

for formats that the AVR 510 may not be capa-

ble of processing. When an adapter is connected

to the

6-Channel Direct Input

ª

, you may

select it by pressing the

6-Ch Direct Input

Selector

. The 6-Channel Direct Input may

also be selected by pressing the

Input Source

Selector

button

!

on the front panel until

the words

6CHDIRECT

appear in the

Main Information Display

Y

, and a green

LED lights next to

6CH

in the

Input

Indicators



.

Note that when the 6-Channel Direct Input is in

use, you may not select a surround mode, as

the external decoder determines the processing

in use. In addition, there is no signal at the

record outputs or bass management when the

6-Channel Direct Input is in use.

Memory Backup

This product is equipped with a memory backup

system that preserves the system configuration

information and tuner presets if the unit is acci-

dentally unplugged or subjected to a power

outage. This memory will last for approximately

two weeks, after which time all information

must be reentered.

37

31

* CHANNEL ADJUST *

FRONT LEFT

: 0dB

CENTER

: 0dB

FRONT RIGHT

: 0dB

SURR RIGHT

: 0dB

SURR LEFT

: 0dB

SUBWOOFER

: 0dB

CHANNEL RESET:

OFF

ON

RETURN TO MENU

34

32

OPERATION

Operation

Harman Kardon AVR 510 Owners Manual - Page 32

Channel Direct Input

Page 32 highlights