Harman Kardon AX20 Owners Manual - Page 16
SPECIFICATIONS, Fibrinan-Kardon, Street, Westbury
View all Harman Kardon AX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Circuits: Output Level: Peak Power Output: Output Impedance: Frequency Response: Damping Factor: Hum: Stereo Preamplifier Separation: Tone Control Range: Rumble Filter: Input Levels: 'Tape Output Level: Second Preamplifier Output Level: Record Equalization: Tape Equalization: ,' SPECIFICATIONS 2-1,7,L84's self biased, pentode connected in push-pull. Two separate self contained preamplifiers feeding through ganged tone and volume controls. One preamplifier feeds the power amplifier directly and the other terminates in an output jack for use with an external amplifier for a full stereophonic system. 20 watts at less than 1% harmonic distortion. 17 watts at less than 0.5% harmonic distortion. 5 watts at less than 0.2% harmonic distortion. 17 watts at less than 2% intermodulation distdrtion. Harmonic distortion readings at 1000 c.p.s.; Intermodulation distortion readings at 60/6000 c.p.s.: 4:1; All at 16 ohm load-120 volts. 40 watts. 8 and 16 ohms. ±0.5 db 15-30,000 c.p.s. at 1 watt, db 20-20,000 c.p.s. at 15 watts. 5 Minimum Volume: 90 db below 15 watts. Tuner & Aux.: 80 db below 15 watts (0.5 volt input reference) Phono (RIAA Position): 70 db below 15 watts (6 my input reference) Tape Input: 60 db below 15 watts (1 my 250 c.p.s. input reference) Better than 50 db. db at 50 e.p.s. ±12 db at 10,000 c.p.s. 12 db per octave below 50 c.p.s. Aux. and Tuner,- 300 millivolts, flat response. Phono-Lo (Mag ): 3 my at 1 KC Phono-Hi (Ciystal or Ceramic): 20 my 1 KC Will not overload with input level below 350 MV. Tape: 1 my. at 250 c.p.s. 1 volt from each channel, pfunodified by volume and tone controls. v 0.5 volts, low impeerance modified by all controls. RIAA and EUR. NARTB 75 and 255 Fibrinan-Kardon, Inc., 520 Main Street, Westbury, L. I., N.