Harman Kardon AX20 Owners Manual - Page 7
phonographs
View all Harman Kardon AX20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
How To Play A Monaural LP Record: If you have been playing stereo records, merely remove the stereo record and put on a monaural record. It's as simple as that! All stereo record players and phonographs are completely compatible with monaural LP records. LP's and stereos may he intermixed on any good stereo record changer. USING THE MODEL AX20 AS A MONAURAL AMPLIFIER INSTALLATION PROCEDURE Connecting Your Speaker: Connect one lead from your speaker to the G terminal on the SPEAKER TERMINAL strip, and the other lead to the 8 or 16 ohm terminal depending on the impedance of the speaker you are using. (See Figure C) A and B terminals must remain strapped. The SPEAKER SELECTOR switch located on the front panel is inoperative for this method of operation. A BG 8 16 SPEAKER SPEAKER HOOK UP OF AX20 AS MONAURAL AMPLIFIER Figure C Connecting Two Monaural Speakers: The Model AX20 allows you to operate two independent speaker systems if you prefer. You may then select one speaker or the other, or operate both simultaneously. Remove the strap between the A and B terminals. Attach one speaker to the A and 16 ohm terminal on the SPEAKER OUTPUT strip and the other speaker to the B and 16 ohm terminals on the same strip. If your speakers are 8 ohms, connect one speaker to A and 8 ohms and the' other to B and 8 ohms. ( See Figure D) The SPEAKER SELECTOR switch located on the front panel is operative for this method of operation. SPEAKER A 00 8 G 8 16 SPEAKER SPEAKER B SPEAKER HOOK UP OF AX20 AS MONAURAL AMPLIFIER USING TWO SEPARATE SPEAKERS Figure D