Harman Kardon AX20 Owners Manual - Page 6

amplifier.

Page 6 highlights

Connecting Your Tuner: The output of your monaural tuner should be connected to either the left or right TUNER jacks located on the rear panel. Plug the AC power cord of your tuner into one of the AC convenience outlets located on the rear panel of the Model AX20. Connecting Your Record Player: Any type of record player may be used with this amplifier. If your player uses a low level magnetic cartridge plug it into either the LEFT or RIGHT LO PHONO input. If you are using a monaural ceramic or crystal cartridge plug it into either the LEFT or RIGHT HI PHONO input. Connecting Your Tape Player: Connect your monaural tape deck to one of the TAPE HD input jacks on the rear panel. Connecting Your Tape Recorder: Since most monaural tape recorders have their own preamplifier, it is not desirable to plug the output of the recorder into the TAPE HD jack. This might cause overloading of the input stage. Connect the recorder output plug to either LEFT or RIGHT AUX jack on the rear panel. Connecting Your Tape Recorder To Make A Recording: Provision is made on your Model AX20 to permit the recording of any program material. Connect the input of your monaural tape recorder to either the LEFT or RIGHT TAPE OUT receptacle located on the rear panel. if the program source you desire to record is plugged into the left preamplifier channel, use the LEFT TAPE OUT jack and if it is plugged into the right preamplifier channel, use the RIGHT TAPE OUT jack. This will enable you to make a recording with the proper recording equalization as determined by your recorder, while simultaneously monitoring the program with the proper tone control, contour and loudness setting. Connecting Auxiliary Monaural Equipment: A TV tuner or other similar device with a high output level may be connected. to either the LEFT or RIGHT AUX jack on the rear panel. OPERATING THE MODEL AX20 AS A MONAURAL AMPLIFIER The Model AX20 incorporates the following front panel controls. Viewing the instrument from left to right you will note a TREBLE control (on/off switch is incorporated in this control), BASS control, LOUDNESS Control, BALANCE control, MODE switch and FUNCTION switch. On the upper section you will note a SPEAKER SELECTOR switch, RUMBLE FILTER switch, CONTOUR switch and EQUALIZATION switch.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

Connecting
Your
Tuner:
The
output
of
your
monaural
tuner
should
be
connected
to
either
the
left
or
right
TUNER
jacks
located
on
the
rear
panel.
Plug
the
AC
power
cord
of
your
tuner
into
one
of
the
AC
convenience
outlets
located
on
the
rear
panel
of
the
Model
AX20.
Connecting
Your
Record
Player:
Any
type
of
record
player
may
be
used
with
this
amplifier.
If
your
player
uses
a
low
level
magnetic
cartridge
plug
it
into
either
the
LEFT
or
RIGHT
LO
PHONO
input.
If
you
are
using
a
monaural
ceramic
or
crystal
cartridge
plug
it
into
either
the
LEFT
or
RIGHT
HI
PHONO
input.
Connecting
Your
Tape
Player:
Connect
your
monaural
tape
deck
to
one
of
the
TAPE
HD
input
jacks
on
the
rear
panel.
Connecting
Your
Tape
Recorder:
Since
most
monaural
tape
recorders
have
their
own
preamplifier,
it
is
not
desirable
to
plug
the
output
of
the
recorder
into
the
TAPE
HD
jack.
This
might
cause
overloading
of
the
input
stage.
Connect
the
recorder
output
plug
to
either
LEFT
or
RIGHT
AUX
jack
on
the
rear
panel.
Connecting
Your
Tape
Recorder
To
Make
A
Recording:
Provision
is
made
on
your
Model
AX20
to
permit
the
recording
of
any
pro-
gram
material.
Connect
the
input
of
your
monaural
tape
recorder
to
either
the
LEFT
or
RIGHT
TAPE
OUT
receptacle
located
on
the
rear
panel.
if
the
program
source
you
desire
to
record
is
plugged
into
the
left
preamplifier
channel,
use
the
LEFT
TAPE
OUT
jack
and
if
it
is
plugged
into
the
right
preamplifier
channel,
use
the
RIGHT
TAPE
OUT
jack.
This
will
enable
you
to
make
a
recording
with
the
proper
recording
equalization
as
determined
by
your
recorder,
while
simul-
taneously
monitoring
the
program
with
the
proper
tone
control,
contour
and
loudness
setting.
Connecting
Auxiliary
Monaural
Equipment:
A
TV
tuner
or
other
similar
device
with
a
high
output
level
may
be
connected.
to
either
the
LEFT
or
RIGHT
AUX
jack
on
the
rear
panel.
OPERATING
THE
MODEL
AX20
AS
A
MONAURAL
AMPLIFIER
The
Model
AX20
incorporates
the
following
front
panel
controls.
Viewing
the
instrument
from
left
to
right
you
will
note
a
TREBLE
control
(on/off
switch
is
incorporated
in
this
control),
BASS
control,
LOUDNESS
Control,
BAL-
ANCE
control,
MODE
switch
and
FUNCTION
switch.
On
the
upper
section
you
will
note
a
SPEAKER
SELECTOR
switch,
RUMBLE
FILTER
switch,
CON-
TOUR
switch
and
EQUALIZATION
switch.