Harman Kardon GPS-500 Quick Start Guide - Page 4
In-Vehicle Installation - how we can used
![]() |
View all Harman Kardon GPS-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
In-Vehicle Installation 1 Select Mounting Location Windshield-Mount Lock Unlock 2 Install ! Mounting Base Do not install this device in any manner that impairs the safe operation of the vehicle. Do not install this device on any airbag panels or in the deployment field of any airbags. Do not place the device on the vehicle's dashboard unsecured. Failure to observe the installation or usage instructions may result in traffic accidents or personal injury. Display Angle Adjustment 3 The installation of this device on the Install GPS-500 windshield, between the driver and the in Mounting Base windshield, or otherwise in any manner that obstructs the driver's clear view of the road or traffic conditions is dangerous and may be prohibited by law. In this case other mounting methods should be used. Check your local laws before mounting. 2 Some vehicles have a heat reflective shield embedded in the windscreen. This may prevent the unit from getting proper GPS reception. In this case please use an external GPS antenna and connect it to the antenna plug on the back side of 1 the unit. GPS-500 Dash-Mount Clean dash with supplied alcohol pad. Route TMC cable alongside bottom part of the winshield Connect TMC cable Installation of TMC antenna cable to receive traffic information 4 Quick-Start Guide
![](/manual_guide/products/harman-kardon-gps500-quick-start-guide-42925a2/4.png)