Harman Kardon SC6 Owners Manual - Page 6

TONE ARM ADJUSTMENTS (Refer to Figure 3) SET DOWN ADJUSTMENT: Turn set-down adjustment screw counter clockwise to move needle set-down toward outer edge of record; clockwise to move needle set-down toward center of record. TONE ARM HEIGHT ADJUSTMENT: The tone arm height is set at the factory. No further adjustment should be necessary unless the tone arm height is inadvertently changed. Turn height adjustment screw (on bottom of pick-up body) clockwise to lower. When properly adjusted, top of tone arm will clear bottom of record stack on center spindle by 1/8" minimum. The diamond needle used in this unit is designed for 33 1/3 and 45 RPM recordings. 0O ti SET DOWN ADJUSTMENT SCREW TONE ARM TONE ARM HEIGHT ADJUSTMENT SCREW Figure 3